Hi sewing friends, do you ever look for an easy and fun project to sew beyond making your own clothes? I certainly do !!! I like to expand my crafty skills and knowledge whenever possible. Lately it is by making my own PDF patterns, so it is no surprise that I am bringing to you my newest design!
Since beginning of this year I keep a sewing diary, where I write all my sewing makes so I have a quick reference in case I am unsure about something or I just want to see what I made so far. Using this journal everyday I started to notice some wear and tear on its outside cover and decided that I need to protect it somehow. This gave me an idea to design and try fun and colorful casing….and why not include some pockets….they are great not only on clothes! The pattern size is drafted so it loosely fits A5 notebook, but you can always scale it up or down if you need a different size.
To complete this project you will need:
- Notebook cover PDF pattern
- 100 / 55 cm fabric of your choice
- zipper – 23 cm
- bias binding – 100 cm
- fusible interfacing (optional)
Cut out all the pattern pieces from your fabric, you can be creative here and use different fabric for outside panel or make your pockets in different colors…the choice is yours! I used the same fabric for all pieces except for one front notebook cover piece, because it is an internal/ lining panel, so it is the least visible.
Depending on the fabric of your choice and/or desired stability of the finished cover you may want to interface all or some of the pattern pieces. I recommend fusing at least both sleeves and 1 x front piece.
First, bind the top edges of short and tall pocket pieces, next place the short pocket on top of the tall pocket and stitch two straight lines as indicated on the pattern for a pen slots.
Place zip tabs at each end with right side facing the zipper and stitch it together.
Flip zip tabs and top stitch it in place. Trim the tabs to the width of the zipper.
Place the zipper at the straight edge of zip pocket (A) right sides together and sew it along the length about 4 mm away from zipper teeth. You may need to open and close the zipper as you sew to ensure a straight line. Flip the zipper and top stitch close to the stitch line. Repeat the same process for zip pocket (B).
Take the zipper pocket and place it on top of the sleeve piece with wrong sides together. repeat for the other side. Take tall-short pockets and place it on top of the sleeve with wrong sides together. Sew around the four edges within 1 cm seam allowance to hold it together.
Using bias binding finish off the straight edges on both sleeve pieces.
Take one of the front cover pieces ( internal/ lining piece) and place both sleeve pockets on top ( right sides facing upward for all pattern pieces). Sew around the edges to hold it together within 1 cm seam allowance.
Next, with right sides together place the remaining front notebook cover piece and sew it together with 1cm seam allowance leaving about 10 cm opening.
Finally, turn the notebook cover inside out and hand stitch to close the opening.
Final step. Enjoy your new notebook cover!
I hope this little project brings you joy and remember you can always customize it if you want. I plan to omit sewing pockets and make simple cover for my cooking book and scaling it down for my passport. There are so many other ways you can use this pattern….let me know what you think and if you ever made or are planning to make a similar project.
See you next time,