Make a kids apron with no pattern- sewing tutorial

Hello everybody!!!

In today’s post I will show you how I created this little kids apron without the need for a pattern. It is super quick and fun to sew and it makes for a cute gift.

What you will need is some medium weight cotton fabric and two triangle rings. The amount of fabric needed depends on the size of an apron. This one was made for a 10 years old girl and I used approximately 1 meter of fabric.

Before we start you will need to take waist measurement, preferred length of the apron (starting at the waist to the knee) and height of a bib ( from waist to high bust / around armpit high).

I will include measurement I used in brackets for your information. Seam allowance is 1cm throughout and it is already included.

From the fabric you will need to cut:

1x apron = waist measurement by length of the apron (59cm by 47cm)

2x pockets, size is up to you (15cm by 15cm)

2x bib =1/2 waist measurement minus around 5cm by height of bib (24 cm by 24cm)

2x tab (4cm by 4cm)

1x neck tie (7cm by 55cm, but you can make it shorter/longer)

2x waist tie, the length = waist measurement plus 50cm. The length can be adjusted later if needed to be shorter (5cm by 110cm)

20200105_1338438034385407792133095.jpg

20200105_1339418566632816453545894.jpg

Apron sewing instructions

Take both pockets and press the top edge by 5 mm and again by 1 cm. Top-stitch 8mm from the outer edge

Next, fold towards the wrong side the other edges by 1 cm and press it. To ensure that pressed seams at the corners do not stick out I like to fold and press little triangles.

With right sides together, pin and stitch both tabs together along two opposite edges.

With right sides together, fold in half the neck tie along the long edge, sew it using 1 cm seam allowance.

Turn both pieces inside out and press it flat.

Insert the tab into triangle rings, fold in half and machine tack in place.

With right sides together place the tab and the neck tie at the top edge of the bib around 15mm from sides. Machine in place within 1 cm seam allowance.

20200105_150154

With right side facing each other place the other bib piece on top of the first, pin it around and using 1 cm seam allowance sew it around both sides and the top. Use the bottom edge to turn the bib right side out and press it flat.

20200105_150715

20200105_151647

The other unfinished end of the neck tie fold twice and top-stitch.

Mark the centre at the bottom of the bib piece.

20200105_161815

20200105_151807

Press the apron in half along sides to mark a centre. This will help with a pocket placement.

Using the centre fold as a guide decide on a placement of patch pockets ( mine are around 1/3 from the top and halfway through the centre fold and sides). Place each pocket on top of the apron (all pieces with right sides facing up), pin pockets in place and stitch around sides and the bottom.

Finish off sides and bottom edge of the apron using a serger /overlocker or a zigzag stitch then press it 1cm towards the wrong side of the fabric. Stitch 8mm from the fold.

20200105_143605

Sew two lines of a long basting stitch alongside the top of the apron, tie thread ends on one side and gather the fabric.

20200105_144657

20200105_144513

Mark the centre of waist ties by folding them in half. From the centre, make two notches on each sides = 1/4 of the waist measurement (15cm)

With right sides together place the apron on top of one waist tie. Match centre notches and pin it together. Next, use the other wait tie notches and gather the fabric evenly between them.

20200105_145254

20200105_145354

Once gathered pin it together and sew it using 1cm seam allowance.

20200105_145535

Press the seam towards the waist tie.

20200105_150328

Place the bib seam on top of the waist tie matching at the centre notches. Pin in place and using a basting stitch sew it together within 1cm of seam allowance.

20200105_151940

Align the other wait tie ( right sides together) on top of the first waist tie. Pin it and machine it together around the long and short edges stopping at the sides of the apron.

20200105_152531

Clip corners of the waist ties and turn it right side out.

20200105_153244

The easiest and fastest way to turn the ties to the right side is by pushing the closed end inside the tie using something with a blunt end such as a chopstick or a screwdriver.

20200105_153438

20200105_153508

Tease the corners with a pin or a needle to make it neat and press it flat along the entire length of the waist tie tucking inside 1cm allowance at the centre opening. Pin in place and close it using a ladder stitch.

Give the apron final press and you are done 😉

 

20200106_150323

What I love about this apron the most is its simplicity and the fact that there is no pattern needed. By taking few measurements it can be made not only for kids of any age but also adults. The adjustable neck tie also gives an interesting feature.

What do you think?

Monika xxx

Author: All Sew Petite

This blog is about my love of sewing. I will try to document all my makes, any patterns adjustments or fitting issues...and there will be many as a petite person I can barely find anything that fits.

One thought on “Make a kids apron with no pattern- sewing tutorial”

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s