Sew your own oven gloves- sewing tutorial

Hi all!!! Today’s post is yet another scrap buster project that is quick and easy!

I will show you how to make your own oven gloves, which you can use in the kitchen while making a delicious meal or gift it to someone if you already have a pair.

There are many free oven gloves patterns that you can download, I used a pattern from a book “The hand-stitched flower garden” by Yuki Sugashima….a little random you may think, but this year I wanted to learn hand embroidery and I purchased this little book, which I was told is great for a beginners like me. It includes 20 small projects that you can decorate with 45 beautiful floral designs and one of them includes a pattern for a oven gloves which is fantastic.

Sewing instruction

Once you find the pattern that you like, cut 2 pieces out of the main fabric, 2 pieces of a lining fabric and 2 pieces of a heat resistant fabric such as Insul-Bright ( I purchased a meter of the eBay few years ago, so had some leftovers) plus a 4 cm by 10 cm rectangle for a loop for each glove that you want to make. As expected this will get in contact with a heat so it is best here to avoid synthetic materials as they may melt under the high temperature. I went through my scrap basket and found a fat quarters of a cotton fabric in various colors.

20190421_132243

If this is the first time you are using a heat resistant fabric the only thing you need to remember is that the silver and shiny side of the material is a side which will bounce heat back to it’s source protecting you from the temperature.

To start you place the wrong side of the main fabric on top of the shiny side of the heat resistant material and stitch it in place. I drew 1 inch squares as a guidelines and stitched it in place.

20190421_133610

20190421_140511

Next, make a loop and attach it to the side around 2-3 cm away from the top edge.

20190421_151217

Place patterns of main fabric right sides together and stitch around with your allocated seam allowance.

20190421_140858

Take lining pieces and with right sides together sew it around the edges in the same way as in previous step.

20190421_140342

Trim the seam allowance to around 5-7mm and clip it close to the stitch line.

20190421_141034

Turn only the main body to the right side and insert the lining matching the side seams together.

Pin it in place and sew it in place using a long straight or zigzag stitch, that will be covered later.

To finish the raw edge take a bias binding and starting at a side sew it all around following a creased line.

For a clean finish is best to start sewing the bias binding by folding the edge of a tape inside. This will stop any unravelling in the future.

Next, simply turn the bias binding over the raw edge and top stitch it.

And now it is time to enjoy your new oven gloves by making some cookies or cupcakes….at least this is what I want to do.

I have some more of that fabric left so decided to do a matching hot pot holders too. Coming next….

~have fun baking/cooking and let me know what you made~

Monika xxx

Pattern drafting-half circle skirt with front button placket

Do you ever get inspired by looking at what other people wear? I am definitely guilty of that in my latest make.

The summer shortly will come to an end, but I really wanted to make myself a half circle skirt with a front button placket. If you would look into my closet you would not find a single skirt there, so I am a bit confused of my latest obsession. This must be the result of two patterns that were so popular this summer and countless number of beautiful makes by other dressmakers that I have seen on Instagram….Seren dress by Tilly and the Buttons and Fiona Sundress by Closet Case Patterns. I really admire both patterns, so have decided to put my newly learnt pattern drafting skills to test and make my own version of a skirt with a front button placket.

20180913_103327

Pattern Drafting

To start drafting a half circle skirt pattern firstĀ  draw two lines with 90 degrees angle and fold it in half ,or make a line of 45 degree angle. This line will be the center of the front and back skirt pieces and also our grain line!

For the ease of taking picture of the entire pattern my drawing is a mini version.

20180913_091354_001

To find a r =radius there is a little math involved, but do not worry, all you need to do is to take your waist measurement and divide it by 3.14. Is as simple as that! Now take that measurement and draw a quarter of a circle. This way we create the half of the pattern.

20180913_091803

Next, measure the desired length of your skirt and trace it onto the pattern following theĀ  circle seam of the waistline. The straight lines will become a skirt’s side seams, so we need to remember to add a seam allowance.

Seam allowance need to be also outlined on the hemline and the waistline to finish drafting the skirt back pattern piece. This piece need to be cut only once on a single layer of fabric, or you can fold it along C/B (center back) if you prefer to cut your fabric on fold.

TIP: If you prefer a half circle skirt without the placket you can use this pattern as both front and back pieces and cut it twice.

20180913_093039

Before we go into drafting the front skirt piece we need to decide the width of the button placket.

TIP: The placket must be bigger in width to allow for buttons to sit in a center. I had used buttons with a diameter of 2 cm, so my completed placket width is 3 cm. This gives me half a centimeter on each side of the button, which is the minimum you will need.

I like to use the same back pattern when drafting the front (to reduce paper waste) but for the clarity of this step I am using a bigger scale.

From the center front line (marked as C/B on back piece) draw a parallel lines 1.5 cm away on each side to outline the placket. You can decide on button placement now if you wish, but this is not necessary at this point.

 

20180913_095716

The center front line on the front skirt pattern piece need to be reduced to accommodate for the placket allocation. The edge of drafted placket will become a new C/F (center front). Because the skirt front is formed from two separate pieces it is important here to add a seam allowance to new C/F.

20180913_100234

Now, it is time to draft the button placket, which is easy as all you need to do is copy the outline from the Front pattern and add seam allowance on all sides. Now would be the best time to mark button and the buttonhole placement.

20180913_101011

The last pattern piece to be drafted for this skirt would be the waistband. I opted for the easy version of having straight rectangle folded in half, but if you prefer more close to body fit you can draft a slightly curved waistband.

20180913_103331

And as a bonus….why not add some pockets!!!

You can draft a pocket by choosing any style and shape not forgetting to add seam allowance to all sides.

TIP: Notches including pocket placement and grain line are always important so make sure you remember to highlight them on you pattern pieces.

20180913_103944

That is it!

~Now you own a self drafted half circle skirt with a front button placket!!!~

Monika xxx