Perfect for Winter -Pisco dress – hacking the pattern

Hello everyone!

Do you belong to a group of sewists who is using , hacking and adapting a pattern they like to make many different looks, or do you think it is a waste of time and just prefer to buy a new pattern that resembles the style you want??? I belong to the first group and enjoy immensely the whole process and the final result. I must say that I am not always successful at it, but it is always a learning curve.

The latest hack that I had done, which also was a success, was made on a Pisco dress by SBCC Patterns. You can find a post and my review of this pattern here.

20200116_2115185460201159017821436.jpg
Pisco dress and my design

I fell in love with this pattern so much that I knew I was going to hack it any way I can! As it is a sleeveless dress, the first think that came to my mind was to simply add sleeves. After that I thought it would be nice to have a cosy and warm dress during Xmas holidays ( I went to Poland, where the temperature dropped to -5 and it was snowing alot), so I wanted to also add a turtleneck.

Hacking the pattern

To ensure I do not mess up my existing Pisco dress pattern I had first copied the bodice pieces (front, back and sides) up to waistline and left a free space around each piece to allow me to do any adjustments.

I started adapting the pattern by changing the neckline and drafting a separate turtleneck pattern, because it was the easiest part. To do this I simply merged the front and back Pisco neckline with a Freya top pattern by Tilly and the buttons. Next, I took a Freya roll neckline pattern and lengthened it by 7cm.

The process of hacking the armhole and adding sleeve pattern was more complicated, because original Pisco dress pattern has armhole band that is shapped and not symmetrical, also the bodice is shaped using princess seam with side panels.

First I pinned all parts of the bodice seams together just under the armhole to give me an idea of how the pattern pieces lay together and to see the curve of the armcycle.

Next using the Freya top front and back pieces I placed it on top of The Pieco pattern to check if I can use it as a guideline. It was pretty easy to do on the back so I copied the outline and angle of the shoulder seam and a curve of the back armhole.

I did the same for the front, however I had to guess the shape of the front armhole curve, because of the princess line shaping. To do this I measured the width of the Pisco armhole band at the side seam and use this number to extend the side seam going towards armpit. Otherwise the armcycle would have too low cut. After that I simply conected and smoothed the front and back armhole curves to meet at the new seam line, but keeped the shape of the copied armhole at the start of each shoulder seams as far as possible.

For the sleeve pattern I also decided to use a copy of the Freya sleeve, because the overall circumference of a newly drafted armcycle was very close in measurements to that of the Freya top.

20200116_211055615130490833986034.jpg

20200116_2111341967049296552323860.jpg

Fabric choice

For this project I had purchased 2 meters of this lovely cotton blend sweatshirting fabric from Universal textiles in Shepherd’s Bush (£12.99/meter). This was a first time I had a chance to sew this type of fabric and I have to say it was pretty easy apart from the rolling edges ( had to use more pins to keep it flat). However I decided to use this as a feature on my turtleneck, by leaving the top edge raw.

I really like how warm and cosy this fabric is, but what took me by surprise was the lack of stretch. I do not know if all sweatshirting fabrics are like this, but when I think about RTW joggers and hoodies made out of this type of material it always seam that it have more stretch to it….but maybe I’m wrong?

Sewing the pattern

The entire process of sewing this pattern was nice and smooth, because the fabric was easy to handle and manipulate and because I am familiar with both Pisco and Freya patterns.

Once I had decided to leave the turtleneck hem raw and allow it to roll naturally I had to take a moment to think what would be best way to finish off the seam at the back. I did not want simply to overlock it because when rolled outside it would be visible, so I opted to go for more of a visible feature stitch. I opened and trimmed the seam allowance and used the biggest zig zag stitch on my machine to flatten and cover the entire seam allowance. It looks more tidy in my opinion and ads some character. Mind you it cannot really be noticable when my hair are down.

I came upon one problem once I finished making the dress. When I tried it on I barely could put my arms through the sleeves. oooohhh boy!!! During the time I was altering the pattern I didn’t know what fabric I would pick and was expecting to use a Ponte Roma fabric which has a lot more give. In hindsight I should have thought about it once I had my fabric, but I didnt think it would make such a difference…..I was wrong! Luckily I had enough of fabric scraps to cut two large rectangles . I had to unpick both sleeves, cut them in half and insert the panels in the middle to increase arm circumference. This process made the sleeve head larger but I still managed to ease it in into the armhole. Next time I will have to pay more attention to the type of fabric and stretch percentage.

Final thoughts

I really like the way this dress turned out, even with all new features and amendments and  I wore it as planned during the Xmas dinner. The process of hacking this pattern and merging it with another one opened a new door for so many possibilities! It definitely saved me a lot of time, because drafting pattern takes time for me. I have few more ideas how I can transform the Pisco pattern, so do not be surprised if you hear it being used again 😉

Monika xxx

Pattern testing Pisco Dress by SBCC Patterns

Hi sewing friends! In today’s post I will share with you yet another pattern I had the honour to test before it’s release into the wild. This time it is a pattern by Betsy, from Skinny Bitch Curvy Chick Patterns. Few weeks ago I noticed a call out for pattern testers on Betsy’s Instagram Stories and straight away jumped into it without even thinking. In all honesty I need to admit that this was my very first time making a pattern by SBCC. Imagine my reaction when I realized that they cater for petite women in particular!!! OMG!!! This gets better and better! Will this be my TO GO pattern company from now on??? But enough of my rumbling…lets talk about the Pisco Dress!

Pattern

Pisco top/dress is a pattern designed for a knit fabrics. It comes as a semi fitted dress option that depending on your fabric choice can be made into more sporty and everyday dress or more of a cocktail and evening dress or you can make a cute top that is great for layering.

The pattern is drafted with princess seams, nice round neckline and a shaped armhole bands that I see myself hacking into a cap sleeves !?

What is great and very unique about this pattern is the option of mix and matching different bra sizes and lengths. It can be a little confusing at first but it is so simple and genius on Betsy’s part. First you have the option of picking a cup size between B,C or D, next you need to choose the lenght of your bodice and skirt. The pattern comes in two lenghts: petite and average and last you pick your size. Just brilliant!!! If you are short waisted pick a petite lenght bodice, if you are long waisted pick average lenght bodice and so on and so forth.

Pattern instruction shows clear illustrations of each step , but omit the fabric layout recommendation. This is understandable, because it would take pages to showcase every single mix option for each size and lenght, however it includes a detailed yardage requirements for all options.

Pattern adjustments

Based on my body measurements I chose cup size C with both petite bodice and skirt in size XL. My waist was falling slightly outside, but looking at the finished measurements I made a decision to try it as it is without grading. I am amazed by how well it fits me, especially on the back! I always have to make some sort of sway back adjustment, but this time it was not the case. It got me thinking…do I even have a sway back, or is it all about proportions???

Obviously this being a tester version it ws not perfect and Betsy made a couple of minor twicks to the pattern that eliminated armhole gaping and gave extra ease for bigger sizes.

The only alternation I had made this time was to “shave off” about 7 mm at the shoulder seam to reduce the gaping. Everything else is exactly as it is on the pattern and I couldn’t be happier!

Fabric choice

To make this dress I purchased this lovely navy Ponte di Roma fabric with white polka dots from 1st for Fabrics. It was £6.50 per meter and I got 2.5 meters because I was not sure at that point how much I will need it. It has perfect amount of stretch for this dress and it is not too heavy. I had used only 1,2 meter so have enough for another project! Looks like the top version will be great for some fabric scrap busting….some color blocking perhaps?!

Sewing the pattern

It took me about 30 mins to cut out the pattern pieces and 2 hours to sew the garment, which is super fast! The dress is made out of 5 panels ( 1x front, 2x sides, 2x backs) plus neckline and armhole binding. That is all!

Final thoughts

You probably guessed that I am absolutely over the moon with this pattern! It feels like it was drafted bespoke for my body. I will be using an re-using this pattern time and time again in the future and already planing to buy ALL of SBCC patterns!

~if you are petite you must have this dress ~

Monika xxx